Equipment models | XJ-300A | XJ-500A | XJ-630A | XJ-800A |
Twisting usage | it is applied to the twisting of above seven pcs of bare copper wires, tinned wires, silver jacketed wires and enameled wires,double twisting for core wires. |
Single wire dia(mm) | φ0.08~φ0.28 | φ0.10~φ0.64 | φ0.15~φ1.04 | φ0.2~φ1.7 |
Stranding section area (square milimeter) | 0.035~0.45 square milimeter | 0.05~2.5mm2 | 0.5~6mm2 | 1.0~16mm2 |
Core wire single wire dia | φ0.25~φ0.8mm | φ0.75~φ1.5mm | φ1.0~φ3.0mm | φ1.0~φ4.0mm |
Core wire stranding outer dia | φ0.5~φ1.6mm | φ1.5~φ3.0mm | φ2.0~φ6.0mm | φ2.0~φ8.0mm |
Pitch(mm) | 4.5-17.5(10 kinds) | 5.82-53.73(34 kinds) | 11.48-100(36 kinds) | 19.8-200(30 kinds) |
Direction of lay | Optional for right or left |
Outer dia*bore*outer width | φ300*φ30*160 | Φ400*φ56*300 φ500*φ70*320 | φ630*φ80*360 | φ800*φ80*600 |
Max rotating speed | 3000(6000/twist) | 2200(4400/twist) | 1600(3200/twist) | 1200(2400/twist) |
Main motor power | 3.7KW | 5.5KW | 7.5KW | 11KW |
Inverter power | 3.7KW | 5.5KW | 7.5KW | 11KW |
tension control method | (Mechanism friction) |
protection | Machine will automatically brake when wire inside and outside is broken, the machine will automatically stop when the preset length is arrived. |
Brake mode | Electromagnetic brake |
Traversing method | ,Rolling ring drive units, winding pitch and breadth are adjustable |
operation mode | Push-button control |
Dimension (L*W*H) | 2300*1000*1150 | 2800*1280*1300 | 3280*1600*1600 | 3600*1850*180 |
Equipment model | XJ-70 | XJ-80 | XJ-90 | XJ-120 |
Usage: | Power Wire/ computer wire/ building wire/data wire/ high frequency wire insulation/jacket sheath extrusion |
Wire specification | 1.5-12mm | 2-20mm | 3-25mm | 10-50mm |
Extrusion material | PVC/SRPVC/LHNF/PE/PP/PU etc |
Screw parameter | L/D ratio:26:1, compression ratio: 2.7-3.2, Screw material:38CrMoAIA, Vacuum heating treatment, Surface Grinding Polishing chromium plating |
Temperature control segments (body+head) | 5+3 | 5+3 | 6+3 | 6+3 |
Power | 40HP | 50HP | 60HP | 100HP |
The highest output | 140KG/H | 180KG/H | 240KG/H | 360KG/H |
The highest wire speed | 400M/min | 300M/min | 250M/min | 180m/min |
Movable water tank | Extension type movable tank, movable lenth is 300mm, over length 1.5m with single segment water dryer. Or as requirement |
Length of U type cooling tank | 7.5M | 7.5M | 10M | 15M |
Accumulate wheel parameter(11+10 grooves) | 250 | 300 | 400 | 500 |
Capstan power | 5HP | 7.5HP | 7.5HP | 15HP |
pay off type | How may shafts, active with moter and passive without moter just as request |
Take up Type | As request |
50+35 core wire extruder | Extruder material: PVC/PE/SRPVC |
Wire specification:AWG30-AWG24,0.8-2.8 |
The highest wire speed:1000m/min Semi-auto take up(depends on wire dia); |
Use for high-speed insulation extrusion for PVC/PE/secondary colour wire and Lan cable(CAT5, CAT5E, CAT6, CAT6A, CAT7) insulation extruder |
Operating Direction:left or right is allowed (For example:if the take up direction is right, it will call"right hand machine" when face electric box.); |
Dosage of air-pressure:18m³/Hr |
Screw parameter: L/D ratio:26:1, compression ratio: 2.7-3.2, Screw material:38CrMoAIA, Vacuum heating treatment, Surface Grinding Polishing chromium plating |
Pay off type: as request |
Take up type: as request |
Centre-height:1000mm; |
ø50mm extruder host+35mm stripping extruder |
Voltage:Three-phase 410V-450 50HZ or as request |
Equipment models | XJ-500B double twisting machine |
Twisting usage | it apply for CAT5/CAT5E core wire pair twisting |
The max.size of wire-receiving bobbin (outer diameter×total length) | φ500×314 |
Max core wire diameter | Φ0.5-1.2mm |
Lay pitch(mm) | 5.8~ 54.53( can adjustable by customer's need); |
Direction of intertwist: | "S"for left,"Z"for right |
Rotation speed of intertwist bow(r/min) | 2500RPM(5000 twist) |
Material of intertwist bow: | spring steel belt |
Motor | 4KW, frequency-envarying speed control |
Wire-receiving stretch force structure | Magnetic power clutch |
The up-and-down structure of wire-receiving wheel: | manual or electricial-hydraulic type |
Electrical control type | PLC |
Electrical control operation interface | standard electric accessories |
achine outside shape size(mm) | 2560×1350×1400 |
Net weight of machine(kg) | 2000 |
Main bearing | Nsk |
Pay off: | Active pay off with motors, double shafts without back-twist |
quipment model | XJ-70 | XJ-80 | XJ-90 |
Usage: | Power Wire/ computer wire/ building wire/data wire/ high frequency wire insulation/ Lan cable jacket sheath extrusion |
Wire specification | 1.5-12mm | 2-20mm | 3-25mm |
Extrusion material | PVC/SRPVC/LHNF/PE/PP/PU etc |
Screw parameter | L/D ratio:26:1, compression ratio: 2.7-3.2, Screw material:38CrMoAIA, Vacuum heating treatment, Surface Grinding Polishing chromium plating |
Temperature control segments (body+head) | 5+3 | 5+3 | 6+3 |
Power | 40HP | 50HP | 60HP |
The highest output | 140KG/H | 180KG/H | 240KG/H |
The highest wire speed | 400M/min | 300M/min | 250M/min |
Movable water tank | Extension type movable tank, movable lenth is 300mm, over length 1.5m with single segment water dryer. Or as requirement |
Length of U type cooling tank | 7.5M | 7.5M | 10M |
Accumulate wheel parameter(11+10 grooves) | 250 | 300 | 400 |
Capstan power | 5HP | 7.5HP | 7.5HP |
pay off type | In order to do not stop machine and change the bobbin, it can use 2 shafts active pay off with motor, and equip the accumulator to use |
Printer machine | Computer-controued inkjet machine |
Take up Type | As request |