• Model NO.：WIND-EP-2000
• Trademark：Wind Automation
• Origin：China
• HS Code：8479811000
• Production Capacity：100 Sets,Year

Basic Info.

Model NO. WIND-EP-2000 Trademark Wind Automation Origin China HS Code 8479811000 Production Capacity 100 Sets/Year

Product Description

Pneumatic Tape Winding Machine for Hydro-generator Coil Bar Insulation TapeSpecification1,Controlled and operated by PC; 2,One cylinder upper and one cylinder lower each at two ends, adjust the coil bar to bandage at the same horizontal level; 3,There are 4 cylinders in the middle, hold the coil bar automatically according to the length of its straight part; 4,Use one electric motor, which drives the gear box to rotate one cycle for a travel of 12.55mm, precision±0.05mm (125.5~126.5mm per 10 cycles); 5,Tape width 25mm, half overlapping, double taping, distance between two pieces 6.25mm, ±0.75mm; 6,Taping speed: 50~200r/min, stepless adjustable by frequency invertor, max. speed: 220r/min ; 7,Max. taping section: 30×70mm2; 8,Length of the straight part: steplessly adjustable between (900~2000mm), (900~3000mm), with double gear explorator of different length; 9,Length of end part to be taped: 650mm, total length to be taped: 3300mm; 10,Center height of the taping head: 1400mm (the user could use a foot board because the center height can't be lower due to the height of the cylinder); 11,Coil bar to be clamped by manual operation at end part; 12,Taping can follow the bend of the coil (angle of the bend between 28~43°), there are 4 pcs. of arc gears for exchange, the taping speed will decrease automatically at the arc to insure the taping quality; 13,Two direction modes available: both the coil leads in same direction and in reverse direction.