How to read the wall-mounted boiler pressure gauge
The wall-hung boiler is an important equipment for home heating, and the pressure gauge is a key component to judge its operating status. Correctly reading the pressure gauge data can help users discover potential problems in time and ensure efficient and safe operation of wall-hung boilers. This article will introduce in detail how to view the wall-mounted boiler pressure gauge, and attach a relevant data reference table.
1. The function of wall-hung boiler pressure gauge
The wall-mounted boiler pressure gauge is mainly used to display the water pressure inside the system. The normal water pressure range is usually between 1-2bar. Too high or too low may affect the normal operation of the wall-hung boiler. The pressure gauge is usually located on the bottom or side of the boiler and has an obvious scale mark.
2. How to read the pressure gauge correctly
1.Observe the position of the pressure gauge pointer: The scale pointed by the pointer is the current system pressure value.
2.Determine whether the pressure is normal:
- 1-1.5bar: ideal pressure range.
- Below 1bar: need to replenish water.
- Higher than 2bar: Drainage and pressure reduction are required.
3.Check for pressure fluctuations: If the pressure fluctuates frequently, there may be water leakage or system failure.
3. How to deal with abnormal pressure in wall-hung boilers
| pressure range | Possible reasons | Solution |
|---|---|---|
| Below 1 bar | The system is short of water and the pipes are leaking | Add water to 1.5bar and check for leaks |
| 1.5-2bar | normal range | No action required |
| higher than 2bar | Too much water and too high temperature | Drain and reduce pressure or check expansion tank |
4. Frequently Asked Questions about Wall-hung Boiler Pressure Gauge
1.What should I do if the pressure gauge pointer doesn’t move?
- The pressure gauge may be damaged and need to be replaced by a professional.
2.What should I do if the pressure gauge reading is inaccurate?
- Check the pressure gauge for water or moisture, and replace it if necessary.
3.What should I do if the pressure gauge fluctuates frequently?
- There may be air in the system and it needs to be exhausted.
5. Daily maintenance suggestions for wall-hung boilers
1.Check pressure gauge regularly: It is recommended to check at least once a month.
2.Pay attention to the frequency of hydration: If you replenish water frequently, there may be water leakage problems.
3.Special attention in winter: Low temperature may cause water pressure to drop, and water needs to be replenished in time.
6. Summary
The wall-hung boiler pressure gauge is an important tool for judging the operating status of the system. By regularly checking pressure gauge readings, users can discover and solve potential problems in time to ensure efficient and safe operation of the wall-hung boiler. If you encounter a problem that cannot be solved, it is recommended to contact professional maintenance personnel.
Through the above content, I believe you have mastered the method of viewing the wall-mounted boiler pressure gauge and the skills to deal with common problems. Proper maintenance of a wall-mounted boiler can not only extend its service life, but also provide a stable heating experience for the family.
check the details
check the details
en
